What Is Renewable Energy?

Renewable energy sources power modern grids via solar photovoltaics, wind turbines, and hydropower, using power electronics, inverters, smart grid controls, and energy storage to enhance reliability, grid integration, load balancing, and efficient transmission.

What Are Renewable Energy Sources?

Systems that convert solar, wind, and hydro energy into electricity using inverters and controls for grid compatibility.

✅ Employs power electronics: MPPT, PWM inverters, and converters

✅ Integrates with smart grids for frequency, voltage, and VAR control

✅ Requires storage (batteries, flywheels) for intermittency mitigation

Renewable Energy Sources are any renewable energy source that can be turned into the generation of electricity. Most renewable energy systems depend on natural souces of energy such as solar energy, wave energy, water energy, wind energy, etc that takes advantage of these energy souces to facilitate the conversion of those energies through the mechanical action of a generator to manufacture electricity. Also energy in the form of heat from deep in the crust of the Earth can be converted into electric power. This is known as "geothermal energy" production. There are other instances in which electricity can be generated from biofuel energy and fuel cell technology. The main advantage of renewable energy sources is that they are considered non-polluting but some can be unreliable, depending on when the sun shines and the wind blows, which is not how electricity is consumed. For a broader overview of definitions and technologies, see this guide to what renewable energy entails for additional context.

Despite inherent problems with the technology behind renewable energy sources, increasing environmental pressure is forcing development at an increasing pace. By the end of 2002, worldwide wind-power generation had exceeded 30 megawatts and had reached an annual growth rate of 25 per cent. Further insights into generation trends are summarized in this overview of renewable electricity with data on deployment.

Renewable Energy Sources

For readers comparing technologies, this summary of the main forms of alternative energy outlines typical applications.

Wind Energy Wind Energy Researchers recently calculated wind power's global potential. They have concluded that wind at many specific locations could produce more than enough electric power to meet world electricity demand. Comparative resource maps and case studies are available in this overview of alternative energy sources for deeper exploration.

Solar Energy The amount of solar energy by any measure is also enormous. Every hour more energy strikes the surface of the Earth than is consumed globally in a year.14 According to the DOE’s Solar Energy Technologies Program, there is on average between 2.8 and 6.2 kilowatt-hours (kWh) of sunlight available per square meter (m2) each day.15 The exact amount of sunlight depends on the region and the season. In the United States, the annual average is 4.8 kWh/m2 per day. Regional insolation data and technology basics are summarized in this renewable energy facts explainer for reference.

Advanced Hydro Hydro-electric power generation currently produces 10 per cent of the electricity production in the United States and is a clean source of renewable energy. However, mega dams and stations have a history of causing negative environmental impacts. Emerging fish-friendly designs and storage options are profiled in this overview of alternative energy solutions addressing environmental trade-offs.

Biomass Biomass is the burning of organic matter – typically agricultural crops and grasses – to produce heat or electricity. Biomass, which is different than solar and wind energy, does contribute significantly to world carbon dioxide emission levels. These emissions, on the other hand, can be offset through plantations of new crops and forests, which absorb carbon dioxide. For biomass to be a significant source of non-carbon emitting renewable energy, plants must be raised with little cultivation and fertilizer, and then transported over short distances, and harvested by methods that do not spoil the environment. Broader market trends and policy drivers are discussed in this guide to renewable alternative energy with practical examples.

Importantly, renewable energy sources produce virtually no greenhouse gas emissions and can effectively address climate change. If unchecked, the disruption of the earth’s atmosphere poses the greatest threat to humankind in our lifetimes. Continuing to fill the atmosphere with greenhouse gases will melt the ice caps, increase sea levels around the world, bring on more intense weather patterns, and adversely affect and disrupt food production, while destroying vast areas of the biosphere. Millions of inhabitants may be without food, shelter and clean water, which could cause political and social revolution and chaos. According to a studies, renewable energy souces, combined with industrial, commercial and institutional energy efficiency measures could decrease greenhouse gas emission pollution by as much as 70 per cent. With relatively little capital and short times for deployment, renewable energy sources could start to positively address global climate issues more rapidly than, say, nuclear power.

Related Articles

• Renewable Energy Channel

What is renewable energy? Electricity from solar, wind, hydro, and geothermal converted via generators and power electronics, integrated with grid infrastructure, energy storage, and smart controls to deliver sustainable, low-carbon power with reliability and efficiency.

What Is Renewable Energy?

Renewable energy is electricity from renewable sources using electronics, storage and controls for low-carbon power.

✅ Sources: solar PV, wind turbines, hydro, geothermal generation

✅ Integration: grid codes, inverter control, frequency and voltage support

✅ Enablers: power electronics, energy storage, microgrids, SCADA

What Is Renewable Energy? Renewable Energy is popularly considered as any source of sustainable energy that has as its source the renewable, natural environment. Most souces of renewable energy include wind energy, solar energy, water energy and biomass energy, as well as geothermal energy. In most cases, renewable energies are replenished by the natural environment. Non renewable energy resources, such as fossil fuels, cannot be replenished. After all, it took eons of time to create deposits of fossil fuels sources and these deposits are in very limited supply and cannot be replaced. For a deeper overview of definitions and key concepts, see this guide on what renewable energy is and why it matters today.

Wind energy, solar energy, water energy and biomass and geothermal energies comprise most of the plantet's renewable energy sources. Solar energy can be turned into electric power through the use of photovoltaic panels. This electric power can be consumed by many electrical appliances. To explore the main types and how they work, review these detailed summaries of renewable energy sources across different technologies.

What Is Renewable Energy? These are systems that are a key part of the portfolio of electricity solutions. For example, today, traditional biomass represents the most important source of power in the developing world, with a 36 per cent share of total electricity consumption. Used in a sustainable way, biomass and other RE sources do not generate additional greenhouse gas emissions. For context on how clean generation is integrated into modern grids, learn more about renewable electricity and its role in power systems.

RE solutions offer many advantages. Since they use indigenous energy sources like wind, the sun, and rivers of water, they contribute to supply security by reducing reliance on electricity imports. There are a variety of national situations in terms of needs and resources, but renewable ernergy resources are largely available in most developing and developed countries. Creating an enabling environment which contributes directly to local economic development. Renewable energy installations bring jobs, capital, and sources of revenue to local communities, often to rural areas where these benefits are needed most. If you are comparing options beyond conventional fuels, this overview of renewable alternative energy explains pathways for communities and planners.

In certain remote locations, where electricity and/or fossil fuel infrastructure does not reach, RE systems can be the only cost effective option. In addition, modern renewable energy systems generate far less air pollution and greenhouse gas emissions than fossil energy systems thus reducing the threat of climate change and health risks. Depending on the installation, renewable ener gy projects may be smaller in scale and not as technically complex to operate and maintain as conventional energy projects. For all of these reasons, renewable energy is a valuable resource in addressing the world’s growing electricity needs. These benefits are central to the case for clean renewable energy as a public health and climate solution.

RE form a relatively small part of the commercial energy portfolio today, but the costs of developing, installing, and delivering renewable energy to consumers have been falling, due largely to improvements in system designs and manufacturing techniques. In many applications, particularly in those instances where gaining access to conventional energy systems is difficult or costly, the market share of RE has been growing steadily in recent years. As deployment scales, modern renewable energy systems are becoming more efficient and accessible for diverse users.

What Is Renewable Energy? Characterising the impact of cost reductions and market share increases is the “learning curve.” Simply speaking, RE manufacturers and developers gain valuable experience with each new installation. The level of industrial experience with conventional energy systems is many decades longer than that for renewable energy systems. With modern research, development, and technology transfer techniques at their disposal, the RE industries have achieved progress. But because of this relative immaturity of some ernergy sources, many industry analysts expect cost reductions and performance improvements to continue at a faster pace in the RE sector, thus gaining greater competitiveness and increasing the likelihood that RE uptake will expand in the future. This accelerating experience base is steadily improving renewable power performance, reliability, and competitiveness.

Related Articles

• Renewable Energy Channel

What Is Renewable Energy Learn the Facts? Explore clean energy sources—solar, wind, hydro, geothermal—grid integration, power electronics, inverters, energy storage, smart grids, decarbonization, reliability, and efficiency in electrical systems operation.

What Is Renewable Energy Learn the Facts?

Electricity from solar, wind, and hydro, converted by power electronics and integrated to grid for low-carbon supply.

✅ Power conversion: MPPT, inverters, and grid-tied converters

✅ Grid integration: protection, synchronization, and power quality

✅ Storage and control: BESS, EMS, frequency and voltage support

What Is Renewable Energy? Renewable Energy is popularly considered as any source of sustainable energy that has as its source the renewable, natural environment. Most souces of renewable energy include wind energy, solar energy, water energy and biomass energy, as well as geothermal energy. In most cases, renewable energies are replenished by the natural environment. Non renewable energy resources, such as fossil fuels, cannot be replenished. After all, it took eons of time to create deposits of fossil fuels sources and these deposits are in very limited supply and cannot be replaced. For a deeper primer on definitions and categories, see this overview from the Electricity Forum at what is renewable energy which clarifies common terms.

Wind energy, solar energy, water energy and biomass and geothermal energies comprise most of the plantet's renewable energy sources. Solar energy can be turned into electric power through the use of photovoltaic panels. This electric power can be consumed by many electrical appliances. You can explore how wind, solar, hydro, biomass, and geothermal compare in this guide to renewable energy sources for further context.

What Is Renewable Energy? These are systems that are a key part of the portfolio of electricity solutions. For example, today, traditional biomass represents the most important source of power in the developing world, with a 36 per cent share of total electricity consumption. Used in a sustainable way, biomass and other RE sources do not generate additional greenhouse gas emissions. Understanding how these options contribute to grids is outlined in an introduction to renewable electricity and its role in modern power mixes.

RE solutions offer many advantages. Since they use indigenous energy sources like wind, the sun, and rivers of water, they contribute to supply security by reducing reliance on electricity imports. There are a variety of national situations in terms of needs and resources, but renewable ernergy resources are largely available in most developing and developed countries. Creating an enabling environment which contributes directly to local economic development. Renewable energy installations bring jobs, capital, and sources of revenue to local communities, often to rural areas where these benefits are needed most. Policy makers often group these technologies under renewable alternative energy when designing incentives and community programs.

In certain remote locations, where electricity and/or fossil fuel infrastructure does not reach, RE systems can be the only cost effective option. In addition, modern renewable energy systems generate far less air pollution and greenhouse gas emissions than fossil energy systems thus reducing the threat of climate change and health risks. Depending on the installation, renewable ener gy projects may be smaller in scale and not as technically complex to operate and maintain as conventional energy projects. For all of these reasons, renewable energy is a valuable resource in addressing the world’s growing electricity needs. These lower-emission options are commonly described as clean renewable energy that supports public health goals.

RE form a relatively small part of the commercial energy portfolio today, but the costs of developing, installing, and delivering renewable energy to consumers have been falling, due largely to improvements in system designs and manufacturing techniques. In many applications, particularly in those instances where gaining access to conventional energy systems is difficult or costly, the market share of RE has been growing steadily in recent years. As learning and scale improve, the affordability of renewable power continues to improve across diverse applications.

What Is Renewable Energy? Characterising the impact of cost reductions and market share increases is the “learning curve.” Simply speaking, RE manufacturers and developers gain valuable experience with each new installation. The level of industrial experience with conventional energy systems is many decades longer than that for renewable energy systems. With modern research, development, and technology transfer techniques at their disposal, the RE industries have achieved progress. But because of this relative immaturity of some ernergy sources, many industry analysts expect cost reductions and performance improvements to continue at a faster pace in the RE sector, thus gaining greater competitiveness and increasing the likelihood that RE uptake will expand in the future. Case studies of maturing technologies highlight how integrated renewable energy systems can accelerate these learning effects.

Related Articles

• Renewable Energy Channel

Clean renewable energy powers electrification with solar, wind, and hydro, leveraging power electronics, energy storage, smart grids, and grid integration to cut carbon, enhance reliability, and optimize load management for sustainable electrical engineering.

What Is Clean Renewable Energy?

Clean renewable energy uses low-carbon sources and advanced grid tech to deliver sustainable electric power.

✅ Power electronics enable efficient conversion and control

✅ Energy storage stabilizes variable solar and wind output

✅ Smart grids and microgrids improve reliability and resilience

Clean Renewable Energy
Widespread use of clean renewable energy technologies (RET) is vital in securing a sustainable global energy system. Advantages of RET include:

• In contrast to conventional energy sources, the potential supply from renewables is essentially infinite and largely free of external costs.
• While clean renewable energy technologies currently still have relatively high installation costs, operating costs are low.
• In many countries, some RET are already competitive with conventional energy sources, for example biomass or biogas applications in Thailand. For most RET, costs will fall significantly below those of conventional energy sources within the next two decades.
• Increased use of renewable energy technologies is an insurance against rising import prices of fossil fuels.
• Renewable energy technology equipment can be produced domestically. For example, China has become one of the leading manufacturers of low-temperature solar thermal applications.

For readers comparing different technologies, this overview of renewable power sources outlines their characteristics and typical applications, aiding informed evaluation.

Given the mention of biomass competitiveness, this primer on biomass renewable energy explains feedstocks, conversion pathways, and typical project scales.

The number of countries where clean renewable energy technologies have seen significant market growth is steadily increasing. However,in most countries of the world, dissemination of new renewable energy technologies is still very limited. A range of barriers – financial, economic, institutional, political and technical – impede implementation. Key barriers include energy markets that are either monopolistic and skewed by subsidies, lack of energy awareness of renewable energy technologies potential and benefits, and a lack of technical and institutional capacity and financing means. So far only a few countries have implemented clean air energy policies promoting renewable energy technologies. To align stakeholders and policies, a concise primer on renewable energy fundamentals clarifies benefits, limitations, and common misconceptions.

Under the Kyoto Protocol, most public and private renewable energy project development companies can generate and market "certified emission reductions" from energy projects that involve renewable energy technologies that reduce carbon emissions in under developed areas of the world. The Kyoto Protocol provides financial incentives for shifting countries to less emissions-intensive economies. But while the Kyoto Protocol is able to lower some of the key barriers to renewable energy project development, especially in regard to the financial and economic aspects, it is not designed to cancel the obstacles. Adjusting these many conditions will attract more renewable energy technologies. These mechanisms can stimulate investment in renewable power projects across emerging markets, improving bankability and accelerating deployment.

Addressing the barriers that discriminate against renewable energy technologies in countries usually requires a mixture of well-designed and mutually supportive policies. Probably the leading issue is the economic performance of renewable energy technologies compared to the traditional energy sources that currently dominate the world's energy demand.There are two main approaches to addressing this central problem for developing renewable energy policies and technologies:

Effective policy design should reflect the maturity and grid-integration needs of different renewable energy sources so that incentives target real system constraints.

1. Bringing down the cost of renewable energy technologies and their related energy services 2. Abolishing market distortions that discriminate against the technologies Both approaches are reinforced by transparent market rules that value renewable electricity for its reliability contributions, flexibility, and environmental attributes.

Measures to address specific economic barriers include priority setting at project level by host countries, development of a suitable legal frameworks. This is not to say that Industrialised countries and the private sector cannot provide assistance such as building capacity and provding financing. But leading industrialized nations should provide international assistance to attract investment in renewable energy technologies. Clear definitions of what is renewable energy support coherent eligibility criteria and measurement frameworks in financing programs.

Related Articles

• Renewable Energy Channel

Renewable energy credits certify MWh-scale green generation, enabling GHG accounting, Scope 2 reductions, RPS compliance, and PPA hedging via registries like WREGIS, GATS, and M-RETS for grid decarbonization and utility procurement strategies.

What Are Renewable Energy Credits?

Tradable 1 MWh certificates for renewable generation, used in Scope 2 accounting, RPS compliance, and decarbonization.

✅ Verifies MWh via meter data and ISO/RTO registry tracking

✅ Enables Scope 2 reductions for facilities and microgrids

✅ Supports RPS compliance and PPA procurement strategies

Renewable Energy Credits, otherwise known as Renewable Electricity Certificates, or Tradable Renewable Certificates (TRCs), are tradable, non-tangible energy commodities that represent proof that 1 megawatt-hour (MWh) of electricity was generated from an eligible renewable energy resource (renewable electricity). For context on how clean generation is delivered and tracked, see renewable electricity fundamentals and related attributes.

Renewable Energy Credits can be sold and traded or bartered, and the owner of the REC can claim to have purchased renewable energy. While traditional carbon emissions trading programs promote low-carbon technologies by increasing the cost of emitting carbon, RECs can incentivize carbon-neutral renewable energy by providing a production subsidy to electricity generated from renewable sources. It is important to understand that the energy associated with a REC is sold separately and is used by another party. The consumer of a REC receives only a certificate. These market incentives often complement policies such as renewable energy tax credits that influence project financing.

In states and provinces that have a REC programs, a green energy provider (such as a wind farm) is credited with one REC for every 1,000 kWh or 1 MWh of electricity it produces (for reference, an average residential customer consumes about 800 kWh in a month). A certifying agency gives each REC a unique identification number to make sure it doesn't get double-counted. The green energy is then fed into the electrical grid (by mandate), and the accompanying REC can then be sold on the open market. Understanding the range of renewable energy systems that can issue RECs helps stakeholders assess performance and eligibility.

Renewable energy power companies benefit from RECs because they serve as an incentive. Many non-renewable energy sources are subsidized, making it difficult for green energy companies to survive. By being able to sell the power and RECs, the company can afford to thrive in the market. Prices for RECs vary widely, just like other commodities, and they are available for sale in numerous locations. Price signals can also vary with the mix of local renewable energy sources and transmission constraints.

By purchasing Renewable Energy Credits, consumers can claim that they are supporting green energy. While a consumer would ideally also purchase renewable energy for his or her home, this is not always possible. RECs allow companies and individuals to support power in areas which do not offer it directly. Consumers should also, of course, practice conservation and work to get green power in their area, but RECs are a good place to start. For companies, they are an important part of doing business responsibly, while thinking about future generations. For households unable to procure green tariffs, RECs align with broader clean renewable energy practices and ongoing efficiency efforts.

Along with carbon offsets and other incentive programs, Renewable Energy Credits are part of a growing movement which acknowledges that even small changes make a big difference. By supporting green energy, consumers show that there is a demand for it, and companies can build more plants or accelerate production with the funds raised through the sale of RECs. Organizations which promote programs like this hope to eventually see everyone's ecological footprint, meaning the amount of resources and space needed to support a particular lifestyle, greatly reduced. Clear explanations of what is renewable energy empower buyers to request credible products and disclosures.

What's the difference between a REC and a Carbon Offset?

All RECs from qualifying new generators represent the environmental attributes of renewable power, principally the fact that producing that power causes less, or no, pollution. When you buy an amount of wind-generated Renewable Energy Credits equal to your electricity consumption, you are legally entitled to claim that you are wind powered, and that your electricity use does not contribute to global warming. In other words, all wind Renewable Energy Credits can convert your electricity to wind power. However, for a REC to be used to offset emissions from driving, flying or heating your home, it must be from a project that would not have been implemented without the opportunity to realize revenues for the carbon reductions (in other words, it must be "additional" to business-as-usual - see "what's the importance of additionality, below"), and not all renewable energy projects can say that. To evaluate such claims confidently, consult resources that present renewable energy facts and common verification methods.

Related Articles

• Renewable Energy Channel

Biomass renewable energy converts organic feedstocks into electricity via gasification, biogas, and CHP systems, integrating with microgrids, power electronics, inverters, and grid-tied generators for reliable, low-carbon baseload and frequency support.

What Is Biomass Renewable Energy?

Energy from organic feedstocks converted to power via gasification, biogas, and CHP, integrated with grid electronics.

✅ High-efficiency CHP improves capacity factor and voltage stability.

✅ Power electronics, inverters, and protection enable grid-tie.

✅ Supports frequency control, reactive power, and microgrid resiliency.

Biomass Renewable Energy is an important source of energy for majority of the world’s population. The use of biomass renewable energy is expected to increase in the near future, with growth in population. In many under developed nations (most especially areas such as parts of Africa, conventional biomass renewable energy dominates national energy strategies, leading to negative impacts on human health and the environment. There are, however, opportunities for developing improved and modern biomass energy technologies, which offer substantial benefits in terms of enhanced quality of energy services and reduction in negative health and environmental impacts. For a concise overview of feedstocks, conversion technologies, and benefits, see this biomass energy overview to understand core concepts.

In addition, the sustainable harvesting of biomass renewable energy resources is essential for ensuring the continued availability of this important energy source particularly for the world’s poor.

Sustainable harvesting practices also align with broader categories of renewable energy sources that emphasize resource regeneration.

Biomass renewable energy plays a vital role in meeting local energy demand in many regions of the developing world. Biomass is a primary source of electrical energy for about two billion people in developing countries. Therefore, it's available to the world’s impoverished nations while providing a suitable energy for cooking and heating. Also, biomass energy-based industries are a chief source of economic development in terms of job creation in rural areas. Modern biomass renewable energy technologies are being widely used in many developing countries as well as in certain parts of the developed world. With proper energy management strategies, supported by appropriate environmental practices, modern biomass renewable energy projects can be a sustainable source of electric power production as well as providing liquid and gaseous fuels. Biomass is therefore not only a central alternative energy source but is probably an important future sustainable energy source. These outcomes contribute to the goals of clean renewable energy that balance access, affordability, and environmental performance.

Growing interest in biomass renewable energy is driven by the following facts among others:

• It can contribute to lessening poverty in developing countries;
• Biomass renewable energy meets power needs without expensive conversion equipment;
• It can deliver biomass renewable energy in all forms that countries need for electricity and heating (in all forms of liquid and gaseous fuels)
• It is carbon dioxide-neutral because as much biomass can be grown as burned
• Biomass renewable energy helps to restore unproductive and degraded lands.

For definitions, policy basics, and key technologies, this guide to renewable energy offers helpful background.

Available statistics indicate that the share of biomass renewable energy in the global energy consumption has remained roughly the same over the last 30 years. Biomass renewable energy accounted for an estimated 14% and 11% of the world’s final energy consumption in 2000 and 2001 respectively (IEA, 1998 and IEA, 2003). The International Energy Agency (IEA) estimates that at global level, the share of biomass in total final energy consumption is comparable to that of electricity (15%) and gas (16%). These figures parallel developments in renewable electricity that are influencing investment and grid planning.

Modern biomass renewable energy technologies have the potential to provide improved energy services based on available biomass resources and agricultural residues19. Widespread use of combined heat and power generation biomass renewable energy options in rural areas can address multiple social, economic and environmental issues that now constrain local development. The availability of low cost biomass power in rural areas could help provide cleaner, more efficient energy services to support local development, promote environmental protection, provide better domestic fuel sources and improve rural life. Bioenergy technologies based on sustainable biomass supply are considered "carbon neutral" and may lead to net carbon dioxide emission reduction if used to replace fossil fuels. For comparative emissions data and lifecycle insights, consult this overview on renewable energy facts to understand trade-offs.

In addition, modern biomass renewable energy technologies can contribute to better bio-waste management. For example, land-fill gas can assist urban waste management, while bagasse-based co-generation reduces the problem of safe disposal of bagasse at sugar plantations. Another advantage of modern biomass renewable energy is its job generation potential – a very important attraction for many developing countries faced with chronic levels of unemployment or under-employment. Existing studies indicate that, in comparison to other primary energy sources, the job generation potential of modern biomass is among the highest. For example, in Brazil, the annual production of 14 billion litres of ethanol from sugarcane is responsible for the creation of 462,000 direct and 1,386,000 indirect jobs in the country, corresponding to a rate of 263,000 annual jobs per MTOE generated. Collectively, these pathways situate biomass within broader renewable alternative energy strategies that enhance resilience and jobs.

Related Articles

• Renewable Energy Channel