The green solution for Big Box cooling

- What do large distribution centers, warehouses, Wal-Mart, SamÂ’s Club, Costco, and Lowes all have in common?

These facilities are all part of what have commonly become known as the big box stores in the construction industry. One would have to admit that over the past 25 years these stores have dramatically changed the landscape of our cities. As the immense demand for large structures has grown, so has the problem of cooling such large buildings in the most efficient and green method possible.

In dealing with the issue of effective climate control, most of these facilities have always defaulted to a standard packaged air conditioning system. However, with the increased cost of energy in the past year, many stores, especially in the Southwest United States such as Wal-Mart Supercenter #4356 in Las Vegas, are opting for an economically and ecologically friendly method of thermal control known as evaporative cooling.

In addition to the significant economic advantage of evaporative cooling (up to 75 percent lower energy consumption than packaged air conditioning in climates with high heat and very low humidity) there are at least six reasons why it is a very environmentally friendly temperature control system.

When you walk along the beach in San Diego and feel a cool breeze coming off the water, this is a great example of evaporative cooling. However, if you go inland 50 miles, you will feel a very real difference because of the high drybulb temperature with no evaporation taking place. Evaporative cooling takes place when warmer air comes into contact with cooler water, causing the water to evaporate into the air and thus have a cooling effect on the air.

This adiabatic process works by taking advantage of differences between the dry bulb temperature (dbt) and the wet bulb temperature (wbt). This differential is known as the wet bulb depression (wbd). The greater the wet bulb depression, the greater the felt effect is on the discharge air temperature. In ideal operating conditions, evaporative cooling systems are typically able to lower the sensible heat of the air by 80-90 percent of the wet bulb depression.

Once the outside air passes through the evaporative medium, it provides cool air that can now be moved through the facility, thus removing heat, and then be vented out, providing a continuous stream of fresh air.

Evaporative cooling systems can use up to 75 percent less power than standard air conditioning rooftop packages. Not only does this decrease the energy consumption and the carbon footprint, but it will also have a significant impact on a companyÂ’s bottom line.

Evaporative cooling systems leave a smaller “hydro footprint” than traditional systems. One might assume that this method of cooling would use more water as it relies so heavily on the resource. However, when comparing water usage, there are more factors at play than the on-site water consumption of the cooling system.

In order to produce the added energy used by packaged air conditioning, power companies are forced to generate up to four times more electricity. In creating this electricity, power companies primarily rely on large cooling towers and water that is stored in reservoirs that will, for example, evaporate up to 7.85 gallons of water to produce 1 kWh of power in the state of Arizona (NREL TP-550-33905). When this unseen additional water usage — what we refer to as the hydro footprint — is considered, packaged air conditioning usage actually requires up to 50 percent more water than evaporative cooling systems.

Example: The weighted power plant water use for Arizona according to the National Renewable Energy Laboratory (NREL) requires 7.85 gallons of water to produce 1 kWh of electricity.

The light weight of evaporative cooling systems can reduce the structural members needed for building support. This reduction of material use is significant when compared to standard package air conditioning equipment, which weighs more. One obvious and positive environmental effect of this is that if fewer materials are needed to provide structural support, fewer materials will eventually wind up in our landfills.

Not only do evaporative cooling systems require less material to support the units, but also they are free from environmentally harmful HCFCs. Evaporative units are also environmentally friendly in that all of the cooling media they use is a paper-based recyclable material, and the equipment is constructed from easily recyclable metals and other materials. These two factors: recyclability and the elimination of harmful HCFCs from the cooling process means that a much smaller carbon footprint is left on the environment.

Evaporative cooling systems are true 100 percent outside air (OA) systems. It accomplishes this by moving large quantities of air that are cooled close to the entering air wet bulb temperature. Not only does this provide cooling, but it also provides air that is approximately 50 percent rh, which is the ideal level for good health. Evaporative cooling is also a very practical solution in that it exceeds the Title 24 requirements that are enforced in California.

The fact that evaporative cooling systems implement nature’s method of cooling, use up to 75 percent less power than other temperature control systems, leave a smaller hydro and carbon footprint, conserve building materials, are recyclable, and provide an effective 100 percent OA system, support the claim that an evaporative cooling system is the most environmentally friendly temperature control system. In light of these factors, any box store, warehouse, manufacturing plant, distribution center, or large industrial facility — in a hot and arid climate — that desires to be environmentally responsible must seriously consider using evaporative cooling as a means of climate control.