PPE For Arc Flash

ppe for arc flash

PPE For Arc Flash - This article explores the selection and requirements of personal protective equipment, addressing key questions and emphasizing the importance of adherence to the latest workplace electrical safety standards. Electrical explosions are among the most severe hazards faced by electrical workers, capable of causing catastrophic injuries or fatalities. Ensuring proper personal protective equipment (PPE) is critical for safeguarding against these dangers. 

 

Understanding Hazards and Incident Energy

An electrical arc is a high-energy electrical discharge that produces intense heat and light. The severity of an arc incident depends on the incident energy, measured in calories per square centimeter (cal/cm²). The higher the incident energy, the greater the risk of injury.

 

NFPA 70E and Arc Rating

The National Fire Protection Association (NFPA) 70E standard provides guidance on selecting personal protective equipmentfor electrical work. It categorizes personal protective equipment based on the arc rating, which is the maximum incident energy a garment can withstand before the onset of a second-degree burn.

 

How to Select PPE for Arc Flash?

Selecting the right protection involves understanding the incident energy level and choosing equipment that can withstand this energy. The workplace electrical safety standard provides guidance on the types of PPE required based on the calculated incident energy. This involves conducting an arc flash risk assessment to determine the potential incident energy exposure at various points in the electrical system.

 

What is Required Against Arc Flash?

The required personal protective equipment varies depending on the energy level of the potential electrical explosion. According to NFPA, the PPE categories are as follows:

  • Category 1: Requires a minimum arc rating of 4 cal/cm². Typical personal protective equipment ncludes arc-rated shirts and pants, and an arc-rated face shield.
  • Category 2: Requires a minimum arc rating of 8 cal/cm². Personal protective equipment typically includes arc-rated long-sleeved shirts, pants, and a face shield or arc-rated hood.
  • Category 3: Requires a minimum arc rating of 25 cal/cm². This includes an arc-rated suit, arc-rated hood, gloves, and additional protective clothing as necessary.
  • Category 4: Requires a minimum arc rating of 40 cal/cm². Personal protective equipment includes a full arc-rated suit, arc-rated hood, gloves, and other protective clothing.

 

How Do You Determine Required Arc Flash PPE?

You need to perform a hazard analysis to determine the required PPE for arc flash. This analysis calculates the incident energy in calories per square centimeter (cal/cm²) that a worker could be exposed to during an AF event. Based on this calculation, the appropriate category can be selected. Tools and software are available to aid in this analysis, ensuring compliance with NFPA 70E and optimizing worker safety.

 

What Materials Must Be Worn Under Arc Flash PPE?

Under arc flash PPE, it is crucial to wear materials that do not melt or ignite when exposed to high temperatures. Natural fibers such as cotton, wool, and silk are recommended because they do not melt onto the skin. Synthetic materials like polyester, nylon, and acetate should be avoided unless they are specifically designed for flame resistance and arc flash protection. Wearing arc-rated (AR) base layers beneath the primary protective clothing can enhance overall protection​.

 

Selecting Arc Flash PPE

Several types of personal protective equipment are available for protection, including:

  • Arc-Rated (AR) Clothing: AR clothing is made from flame-resistant materials and is rated based on its arc rating. This clothing includes long-sleeved shirts, pants, coveralls, jackets, and flash suits. Flash suits are typically worn in high-risk situations.
  • Suit Hoods: Hoods provide additional head, face, and neck protection. They can be worn with face shields or balaclavas.
  • Face Shields and Balaclavas: Face shields and balaclavas protect the face and neck from the heat and light of an explosion.
  • Gloves: Leather gloves with an arc rating protect the hands.

When selecting personal protective equipment, consider the following factors:

  • Arc Rating: Choose PPE with an arc rating that matches or exceeds the incident energy at the worker's location.
  • Comfort and Fit: Ensure the PPE is comfortable to wear and allows for a full range of motion.
  • Durability: Select PPE made from durable materials that can withstand wear and tear.
  • Visibility: Choose PPE with high visibility to ensure the worker can be easily seen.

 

What Materials Must be Worn Under Arc Flash PPE?

The materials worn under arc flash PPE are important for providing additional protection. Cotton or wool underlayers should be avoided, as they can ignite and cause severe burns. Instead, wear non-melting, flame-resistant undergarments made from modacrylic or FR cotton blends.

 

Additional Considerations

Workers should wear the proper personal protective equipment and be trained on the hazards of electrical arcs and how to perform electrical work safely. PPE should also be regularly inspected to ensure it is in good condition.

Proper selection and use of PPE are vital in protecting workers from the severe consequences of accidents. Adhering to workplace electrical safety standards and conducting thorough risk assessments ensures the right protective measures are in place. By wearing appropriate arc flash suits, arc-rated clothing, and additional PPE, electrical professionals can significantly reduce their risk of injury and ensure a safer working environment.

Always consult with safety professionals and refer to the latest guidelines to stay up-to-date with the best practices and advancements in protection.

PPE For Arc Flash On-Line Buyer's Guide

The Electricity Forum Online Industrial Electrical Power Buyer's Guide is an interactive reference tool for buyers and specifiers, providing information on equipment, companies, products and services for North America's electrical industry. Search through hundreds of leading Suppliers and thousands of product categories. Add Your Company Today!

Free PPE For Arc Flash Magazine Subscription

The Electricity Forum is a North American "value added" publisher of Transmission & Distribution print/digital magazine: Electricity Today - a leading electrical transmission and distribution magazine. Magazine is distributed FREE of charge to North American electrical industry professionals.

Contribute To The Electricity Forum

The Electricity Forum is interested in publishing your technical, non-commercial articles, on a wide variety of subjects. We are seeking original content for our Transmission and Distribution Channels. Click here to view our author guidelines and submit your article today!