What we will be driving in 2029

By Winnipeg Free Press


Substation Relay Protection Training

Our customized live online or in‑person group training can be delivered to your staff at your location.

  • Live Online
  • 12 hours Instructor-led
  • Group Training Available
Regular Price:
$699
Coupon Price:
$599
Reserve Your Seat Today
It’s 6 a.m. when Sebastian Myers slips into the garage, unplugs his car and tosses his golf clubs in the trunk. “It’s a great day,” he thinks, before the radio reminds him the Maple Leafs won the Stanley Cup last night.

No fan of the Leafs, he savoured every bit the knowledge it had been 62 years since Toronto last won the cup in 1967. Not wanting to dwell on the negative, he flips the radio over to his favourite digital-radio channel, and a 25-year-old hit by The Killers fills the car.

“Open up my eager eyes / ’Cause I’m Mr. Brightside....”

Slipping the car into reverse and — quietly, electrically — backing out, Sebastian is reminded by the fuel gauge that it’s time to fill up. “It’s easy to forget,” he thinks, largely because it’s been three months since he’s been at the gas station. The first month was the worst, what with his kids’ hockey playoffs all over the city. He wasn’t able to get all his driving done during his 70-kilometre electric-only limit. Since then, the diesel generator, which provides added electricity when the battery dies down, just hasn’t cut in.

Indeed, the amount of time that passes before his generator starts again is so long, Myers sometimes wonders if he shouldnÂ’t add fuel stabilizer the few times he does fill up.

Today, June 10, 2029, his golf trip to Teulon is another time the generator is guaranteed to kick in, probably just south of Gunton on the way home.

MyersÂ’ car, the latest generation of plug-in electric hybrids that combines an electric-only powertrain with a fossil-fuel-powered generator to extend range, began in 2010 as the Chevrolet Volt. Now, 18 years later, the Volt-derived lineup includes a wagon, a small truck and a compact city runabout with an electric-only range so long it comes with only a 10-litre fuel tank.

Virtually every other carmaker offers a version of the plug-in hybrid and all of them run on clean diesel or biodiesel.

In 20 years, perhaps the Leafs will win the Stanley Cup. Then again, perhaps hell freezes over; who knows? But no matter who wins the Cup, itÂ’s likely that what you drive then will be very different from today.

Last summerÂ’s fuel price scare, when prices ran up to $1.40 a litre and beyond, could be just a hint of whatÂ’s to come, particularly if governments here get more antsy about punishing drivers with higher taxes, like in Europe.

ItÂ’s a coming reality, and most car companies are working hard at alternatives. But the question is: What will driving be like in 2029?

The answer, it seems, is: “It depends.”

Will we be driving electric cars? How about hydrogen? Fuel cells? Ethanol? Maybe weÂ’ll be brewing our own biodiesel fuel at home for pennies a litre.

Matt Crossley, director of product, planning and engineering at General Motors, says the key to the future is that there is no one key to the future.

“It’s going to be about choices — electric, diesel hybrid, ethanol and others — and being able to make the smart choice depending on what that power is,” he says.

You can see today some of what Crossley speaks about. In Brazil, ethanol made from sugar cane comprises most of the Brazilian fuel supply. ItÂ’s a natural choice, considering how well sugar cane takes to Brazilian soil.

By the same token, donÂ’t expect to see much in the way of biofuels in Dubai. There, in the sun-drenched, parched stretch of the Middle East, look for the future to be covered in solar panels, delivering electricity to charge batteries. In windy, but less parched areas of the world, look for wind turbines to provide electricity to charge batteries or to crack water into hydrogen and oxygen. Iceland, as another example, may find a way to take its geothermal energy out of the ground and put it on the road.

Ed Kjaer, director of electric transportation at Southern California Edison, says the future of transportation appears inexorably linked to the future of electricity. “Of all the alternatives, electricity is the only one that has a ubiquitous infrastructure, is 100% domestic, has very stable supply and is 25% to 50% of the cost of a gallon of gasoline equivalent,” he says.

Crossley says any discussion about alternative fuels has to include consideration of whether the alternative really is a better choice. He says replacing gasoline engines with electrics in parts of Ontario or the U.S. industrial heartland is a step backward, since those electrics would be charged with electricity generated by coal.

Yet Kjaer argues that even coal-fired plants are being forced by regulation to clean up. “As we connect the transportation wheels to the grid, [electricity] is the only technology that with every mile you drive will be getting cleaner and cleaner,” he says.

Dubai may have the sun to generate electricity, but whether itÂ’s a good location to produce hydrogen depends on how the water arrives to the electricity or the how electricity is delivered to the water. Also, could demand for arable land to grow sugar cane decimate the Amazon rainforest?

Similarly, another knock against ethanol — which also has less heat energy than gasoline — has been that it uses more fossil fuels to produce than it displaces. Demand for biofuel has also, disputedly, been blamed for rising food prices. Crossley says that’s going to change. He points to an announcement at last year’s North American International Auto Show as proof. There, General Motors announced it had teamed up with Illinois ethanol producer Coskata Inc. to investigate production of ethanol from a variety of sources, including garbage and industrial waste. Canadian company Iogen is also working on producing the so-called cellulosic ethanol.

Of course, the future of cars isnÂ’t just about what goes into their fuel supply.

Kjaer predicts energy efficiency will be an increasingly important facet of automotive design — a drastic change from today’s front-faced, box-like vehicles such as Toyota’s FJ Cruiser or the Hummer H2.

“There will be three things that will absolutely drive what that car will look like: one, energy-efficient shape — air flow, weight, fuel efficiency; two, sustainability — whatever the fuel or propulsion system, it has to be done in a sustainable manner; and three, the automobile will continue to be more than just conveyance — because of emerging, communication technology, locational technology and entertainment. The technology will continue to evolve where we will have technology in the car to help us avoid congestion, manage the flow of traffic.”

ThatÂ’s something GM CanadaÂ’s Tom Odell is particularly excited about.

Odell, technology planner for GM Canada, says Vehicle-to-Vehicle (V2V) communication systems will not only make future driving safer but also more economical.

The most obvious use trotted out for V2V communication is the safety aspect. Here, cars would communicate with each other on their relative positions, using GPS technology, to help drivers avoid lane-change collisions and to alert drivers to potential collisions at intersections.

But Odell says a less known use for V2V is when it is integrated into the roadwork infrastructure. For example, a car stuck in traffic at Portage and Main could relay to the infrastructure to tell other cars to avoid the area. In a city such as Winnipeg, thatÂ’s less a big deal than in Toronto, where delays on such well-designed routes as the Don Valley Parkway can add up to countless litres of wasted gasoline and untold tonnes of CO2 emitted in vain. If V2V can save cars from getting stuck in that mess, energy and emissions can be saved.

And when alternative fuels come on stream, V2V can help the driver decide which fuel is most efficient at the time. For example, the plug-in hybrid could talk to the local power utility and only charge itself when peak demand — and in some cases, the cost of electricity — is low. At other times, it may suggest that because of high demand on the grid, it is actually more responsible at a particular time to drive using the gasoline/diesel generator or fuel cell as the source of electricity.

In a completely forward-thinking home, that plug-in hybrid would connect to an energy-management interface that would pull power from a variety of sources — the electric grid when demand is low, solar panels when the sun is bright and wind turbines when it’s breezy. And, for the crowning touch, the system could be set up so that the car could power the home in an emergency, such as a nighttime power outage, for instance.

SoCal EdisonÂ’s Kjaer says V2V communication is just the tip of the electric iceberg. He says that as smart power meters and improved home storage systems (read: batteries) come into play, consumers will have the power to buy electricity when demand (and at some utilities, price) is lowest.

For their cars, he sees consumers able to program their departure time into their smart meter, which will then monitor demand and price overnight and have the car fully charged, at the best possible price, in time to leave for work.

That communication will allow utilities to manage supply and demand on the electrical grid, increasing efficiency, he says. Smart meters will be able to pump electricity into homesÂ’ batteries when the price is lower and pull from the batteries and not the electric grid when prices are high. Kjaer says the value of managing demand in this way far exceeds what could be gained by soaking customers for the higher rate.

In the car, another bit of technology will even be able to shame you into being more energy-efficient, he says.

“Imagine a guy getting this data burst that says yesterday he used x kwh, drove x miles, at x cents per mile, for an efficiency factor of 80%. His wife says, ‘Gee, you didn’t drive all that efficiently. Yesterday, I got 90%.’

“It happens all the time today with the Toyota Prius [which has an energy consumption display],” he says.

With all the talk about, and fires caused by, lithium ion batteries, there really is a serious debate about whether the technology is ready for the bright lights of the automotive world.

ThereÂ’s still work to do.

So what if your battery wasnÂ’t a battery at all?

Few people, other than electronics technicians or engineers, know what a capacitor is. For years, capacitors have been used as electronic components to bypass unwanted energy, create time delays in circuits or resonate circuits operating at radio frequencies. A capacitor is essentially two electrodes, often as plates, separated by an insulating membrane. They pass alternating current and block direct current. But in blocking that direct current (like the current coming from a battery), they build up a charge of electricity. If youÂ’ve ever turned off an old radio and heard the sound slowly fade away, thatÂ’s because a capacitor in the power supply is continuing to power the radio as its charge is slowly dissipated.

Today, the capacitor is getting a new life. ItÂ’s jumping into a phone booth, changing uniforms and emerging as Supercapacitor!

Okay, so it can’t leap a tall building in a single bound, but a supercapacitor can store a ton of electricity — enough to blow batteries out of the water as energy sources for cars.

CanadaÂ’s ZENN Motors is reportedly working on a prototype for a high-speed, high-range electric car using supercapacitors instead of batteries.

Capacitors are solid-state: There is no liquid or gelled electrolyte to freeze, leak or evaporate, which also means they can be considerably lighter than batteries.

Transesterification.

Transester-what?

Long word, key to making fuel at home.

Fuel at home?

Google the keywords “biodiesel at home” and you’ll enter a world where people with diesel-powered cars are making their own fuel for a fraction of the price at the pumps. YouTube has a whole section of videos on building biodiesel processors.

It starts with vegetable oil. It ends in the tank of your diesel-engine-equipped car.

The process is called transesterification, and it’s essentially a way to turn ordinary vegetable oil — the same kind you cook with — into biodiesel. It’s not overly complicated, but it does involve precision.

Vegetable oil is essentially triglyceride. ItÂ’s the glycerin in triglyceride that makes vegetable oil problematic in direct use. Basically, you mix common household lye (potassium lye is preferred) with methanol to produce a catalyst. By mixing the methanol-lye catalyst into the oil, you separate out the glycerin, which settles to the bottom, leaving nearly-ready biodiesel on top. The biodiesel is then decanted into a washing tank, which bubbles air and water through the oil until eventually the wash water comes out clear, indicating that any glycerin residue left from the catalytic process has been removed.

The glycerin and methanol byproducts can be recycled by distilling out the methanol — which can be reused — leaving glycerin, which some biodiesel brewers turn into soap (methanol is poisonous and can be absorbed through the skin, so it must be removed).

Because of the caustic lye and flammable methanol — which all must be heated for the process to work — and the equipment needed to construct the processors, it’s not for the faint of heart. But since lye is no worse than drain cleaner and methanol is often what you use in your fondue set, neither chemical is really beyond what most average people already use.

Most biodiesel brewers use items no more complicated than electric hot water tanks and aquarium pumps to build their processors.

The process is most economical when you use waste vegetable oil (WVO), which you can often get for free or for a nominal cost from restaurants desperate for a safe, legal means to dispose of used cooking oil. WVO requires extra steps, given the food particles and water that may be present. In the future, expect the collection of waste vegetable oil from restaurants to be a growth industry, a new revenue source for restaurants and the end of free oil.

You could use vegetable oil without converting it to biodiesel, but itÂ’s thicker, can damage engines and requires a two-tank fuel delivery system on your car to accommodate the need to start the car and finish a trip using conventional petroleum diesel. Either way, cars that run on vegetable oil or biodiesel can still run on regular diesel, which means you wonÂ’t be stranded if you drive outside the range of your oil or biodiesel supply.

We often hear about algae when scientists are warning that itÂ’s suffocating Lake Winnipeg, but this tiny organism can also provide another fuel of the future.

With the right genetics and production techniques, algae can be produced that is rich in lipids — in other words, fat. Several organizations are researching the potential to grow these porkers of aquatic plant life and extract the fat to use as a diesel fuel. The beauty is that the turnover period from newly sprouted algae to fuel is short and it can be grown again and again.

In terms of the efficiency of agrifuels compared with corn or other crops, algae is the champ by a large margin. It does not require vast acreages of farmland — the algae is grown in plastic tubes filled with water — or copious amounts of fossil fuel, as solar power and electricity are the two main energy inputs.

Algae, according to the U.S. National Renewable Energy Laboratory, is capable of producing 30 times more oil per hectare than competing plants such as rapeseed or sunflower. As an example, to run its transportation needs on sunflower oil, France would have to devote 118% of its total land mass to sunflower production. ThatÂ’s right: France would have to plant more acres of land than it owns.

In a research paper published in Biofutur, a French magazine devoted to advances in biotechnology, biodiesel expert Prof. Michael Briggs at the University of New Hampshire is quoted as estimating the entire U.S. demand for petroleum could be displaced by algae farms totalling a mere 38,500 square kilometres, or approximately 5% of CanadaÂ’s total reported farmland.

Until recently, it seems the focus of the world has been on hydrogen as a future fuel. It has some significant advantages: Pure hydrogen has no carbon, so in combustion with pure oxygen does not create carbon dioxide or carbon monoxide. It is the most abundant element in the universe. In fuel cells, its only emission is water. To say the same about it in combustion requires burning it with pure oxygen, as the nitrogen that makes up 78% of air creates nitrous oxide when burned.

Hydrogen is also the first element on the periodic table, which brings us to the first of its problems: Being first means it is also the smallest, lightest atom there is — a single electron orbiting a single proton. That makes storage, transportation and distribution problematic, as it is able to escape from the tiniest of leaks. Currently, it’s either stored and distributed in liquid form, at an instant-freeze-drying temperature of -253C or under extremely high pressure, about 700 bar or more than 10,000 pounds per square inch.

Either way, the prospects of an incident during refuelling are, well, chilling.

The second is that some of the fastest means of producing hydrogen are themselves very dirty.

Reforming gasoline into hydrogen as a replacement for gasoline not only makes no sense, it leaves behind highly toxic chemicals. Breaking water with electricity is the cleanest if the electricity is clean, but how wise is using water for fuel when parts of the world are already experiencing water shortages?

Turbochargers have long been associated with performance ?— so much so, they’re banned from Formula One race cars — but at least one manufacturer is using turbocharging to get the most out of smaller engines in a bid to save fuel.

Turbochargers are essentially exhaust-driven fans that force air under pressure into an engine. The pressurized air creates a more efficient “charge” of fuel and air inside the cylinder.

Ford announced at last yearÂ’s North American International Auto Show in Detroit a series of what it calls EcoBoost engines.

The idea will be used in vehicles ranging from the compact car that grows out of the Verve concept car right up to F-Series trucks.

Christine Hollander, manager of product communications for Ford of Canada, says EcoBoost promises up to 20% fuel savings and uses already existing technology to gain efficiency.

“We believe these solutions [hydrogen, fuel cells, etc.] are more for the future. What we decided is that we need to think of a solution we can have now and that can be affordable,” she says.

EcoBoost makes its savings by combining direct injection — which injects a precise and small amount of fuel into each cylinder individually — with turbocharging. The results are engines that are both more powerful and more fuel efficient than what they replace. The first application will come later this year on the Lincoln MKS sedan, where the current 3.7-litre V6 engine (with 273 horsepower and 270 pound-feet of torque) will be replaced with a 3.5L twin-turbo V6 (with 340 hp and 340 lb-ft of torque) that is estimated to be 20% more efficient.

While the idea today is to gain more efficiency from gas-powered vehicles, the possibility to adapt the idea to create more efficient on-board generators for cars such as Sebastian MyersÂ’ 2029 Volt remains.

So, whatÂ’s the ultimate solution to driving in 2029? There isnÂ’t one. But hereÂ’s my prediction: a Volt-like plug-in hybrid electric using a supercapacitor for energy storage and an on-board turbocharged, direct-injection diesel motor to recharge the supercapacitor. By then, expect it to run on biodiesel, either brewed at home or by what is now a nascent biodiesel industry.

Related News

The Cool Way Scientists Turned Falling Raindrops Into Electricity

Raindrop Triboelectric Energy Harvesting converts falling water into electricity using Teflon (PTFE) on indium tin oxide and an aluminum electrode, forming a transient water bridge; a low frequency nanogenerator for renewable, static electricity harvesting.

 

Key Points

A method using PTFE, ITO, and an aluminum electrode to turn raindrop impacts into low frequency electrical power.

✅ PTFE on ITO boosts charge transfer efficiency.

✅ Water bridge links electrodes for rapid discharge.

✅ Low frequency output suits continuous energy harvesting.

 

Scientists at the City University of Hong Kong have used a Teflon-coated surface and a phenomenon called triboelectricity to generate a charge from raindrops. “Here we develop a device to harvest energy from impinging water droplets by using an architecture that comprises a polytetrafluoroethylene [Teflon] film on an indium tin oxide substrate plus an aluminium electrode,” they explain in their new paper in Nature as a step toward cheap, abundant electricity in the long term.

Triboelectricity itself is an old concept. The word means “friction electricity”—from the Greek tribo, to rub or wear down, which is why a diatribe tires you out—and dates back a long, long time. Static electricity is the most famous kind of triboelectric, and related work has shown electricity from the night sky can be harvested as well in niche setups. In most naturally occurring kinds, scientists have studied triboelectric in order to avoid its effects, like explosions inside of grain silos or hospital workers touching off pure oxygen. (Blowing sand causes an electric field, and NASA even worries about static when astronauts eventually land on Mars.)

One of the most studied forms of intentional and useful triboelectric is in systems such as ocean wave generators where the natural friction of waves meets nanogenerators of triboelectric energy. These even already use Teflon, which has natural conductivity that makes it ideal for this job. But triboelectricity is chaotic, and harnessing it generally involves a bunch of complicated, intersecting variables that can vary with the hourly weather. Promises of static electricity charging devices have often been, well, so much hot, sandy wind.

The scientists at City University of Hong Kong used triboelectric ideas to turn falling raindrops into energy. They say previous versions of the same idea were not very efficient, with materials that didn’t allow for high-fidelity transfer of electrical charge. (Many sources of renewable energy aren’t yet as efficient to turn into power, both because of developing technology and because their renewability means even less efficient use could be better than, for example, fossil fuels, and advances in renewable energy storage could help.)

“[A]chieving a high density of electrical power generation is challenging,” the team explains in its paper. “Traditional hydraulic power generation mainly uses electromagnetic generators that are heavy, bulky, and become inefficient with low water supply.” Diversifying how power is generated by water sources such as oceans and rivers is good for the existing infrastructure as well as new installations.

The research team found that as simulated raindrops fell on their device, the way the water accumulated and spread created a link between their two electrodes, one Teflon-coated and the other aluminum. This watery de facto wire link closes the loop and allows accumulated energy to move through the system. Because it’s a mechanical setup, it’s not limited to salty seawater, and because the medium is already water, its potential isn’t affected by ambient humidity either.

Raindrop energy is very low frequency, which means this tech joins many other existing pushes to harvest continuously available, low frequency natural energy, including underwater 'kites' that exploit steady currents. To make an interface that increases “instantaneous power density by several orders of magnitude over equivalent devices,” as the researchers say they’ve done here, could represent a major step toward feasibility in triboelectric generation.

 

Related News

View more

The Phillipines wants nuclear power to be included in the country's energy mix as the demand for electricity is expected to rise.

Philippines Nuclear Energy Policy aims to add nuclear power to the energy mix via executive order, meeting rising electricity demand with 24/7 baseload while balancing safety, renewables, and imported fuel dependence in the Philippines.

 

Key Points

A government plan to include nuclear power in the energy mix to meet demand, ensure baseload, and uphold safety.

✅ Executive order proposed by Energy Secretary Alfonso Cusi

✅ Targets 24/7 baseload, rising electricity demand

✅ Balances safety, renewables, and energy security

 

Phillipines Presidential spokesman Salvador Panelo said Energy Secretary Alfonso Cusi made the proposal during last Monday's Cabinet meeting in Malacaaang. "Secretary Cusi likewise sought the approval of the issuance of a proposed executive order for the inclusion of nuclear power, including next-gen nuclear options in the country's energy mix as the Philippines is expected to the rapid growth in electricity and electricity demand, in which, 24/7 power is essential and necessary," Panelo said in a statement.

Panelo said Duterte would study the energy chief's proposal, as China's nuclear development underscores regional momentum. In the 1960s until the mid 80s, the late president Ferdinand Marcos adopted a nuclear energy program and built the Bataan Nuclear Plant.

The nuclear plant was mothballed after Corazon Aquino became president in 1986. There have been calls to revive the nuclear plant, saying it would help address the Philippines' energy supply issues. Some groups, however, said such move would be expensive and would endanger the lives of people living near the facility, citing Three Mile Island as a cautionary example.

Panelo said proposals to revive the Bataan Nuclear Plant were not discussed during the Cabinet meeting, even as debates like California's renewable classification continue to shape perceptions. Indigenous energy sources natural gas, hydro, coal, oil, geothermal, wind, solar, biomassand ethanol constitute more than half or 59.6%of the Philippines' energy mix.

Imported oil make up 31.7% while imported coal, reflecting the country's coal dependency, contribute about 8.7%.

Imported ethanol make up 0.1% of the energy mix, even as interest in atomic energy rises globally.

In 2018, Duterte said safety should be the priority when deciding whether to tap nuclear energy for the country's power needs, as countries like India's nuclear restart proceed with their own safeguards.

 

Related News

View more

Ontario Breaks Ground on First Small Modular Nuclear Reactor

Ontario SMR BWRX-300 leads Canada in next-gen nuclear energy at Darlington, with GE Vernova and Hitachi, delivering clean, reliable power via modular design, passive safety, scalability, and lower costs for grid integration.

 

Key Points

Ontario SMR BWRX-300 is a 300 MW modular boiling water reactor at Darlington with passive safety and clean power.

✅ 300 MW BWR supplies power for about 300,000 homes

✅ Passive safety enables safe shutdown without external power

✅ Modular design reduces costs and speeds grid integration

 

Ontario has initiated the construction of Canada's first small modular nuclear reactor (SMR), supported by OPG's SMR commitment to deployment, marking a significant milestone in the province's energy strategy. This development positions Ontario at the forefront of next-generation nuclear technology within the G7 nations.

The project, known as the Darlington New Nuclear Project, is being led by Ontario Power Generation (OPG) in collaboration with GE Vernova and Hitachi Nuclear Energy, and through its OPG-TVA partnership on new nuclear technology development. The chosen design is the BWRX-300, a 300-megawatt boiling water reactor that is approximately one-tenth the size and complexity of traditional nuclear reactors. The first unit is expected to be operational by 2029, with plans for additional units to follow.

Each BWRX-300 reactor is projected to supply electricity to about 300,000 homes, contributing to Ontario's efforts, which include the decision to refurbish Pickering B for additional baseload capacity, to meet the anticipated 75% increase in electricity demand by 2050. The compact design of the SMR allows for easier integration into existing infrastructure, reducing the need for extensive new transmission lines.

The economic impact of the project is substantial. The construction of four such reactors is expected to create up to 18,000 jobs and contribute approximately $38.5 billion CAD to the Canadian economy, reflecting the economic benefits of nuclear projects over 65 years. The modular nature of SMRs also allows for scalability, with each additional unit potentially reducing costs through economies of scale.

Safety is a paramount consideration in the design of the BWRX-300. The reactor employs passive safety features, meaning it can safely shut down without the need for external power or operator intervention. This design enhances the reactor's resilience to potential emergencies, aligning with stringent regulatory standards.

Ontario's commitment to nuclear energy is further demonstrated by its plans for four SMRs at the Darlington site. This initiative reflects a broader strategy to diversify the province's energy mix, incorporating clean and reliable power sources to complement renewable energy efforts.

While the development of SMRs in Ontario is a significant step forward, it also aligns with the Canadian nuclear initiative positioning Canada as a leader in the global nuclear energy landscape. The successful implementation of the BWRX-300 could serve as a model for other nations exploring advanced nuclear technologies.

Ontario's groundbreaking work on small modular nuclear reactors represents a forward-thinking approach to energy generation. By embracing innovative technologies, the province is not only addressing future energy demands but also, through the Pickering NGS life extension, contributing to the global transition towards sustainable and secure energy solutions.

 

Related News

View more

India is now the world’s third-largest electricity producer

India Electricity Production 2017 surged to 1,160 BU, ranking third globally; rising TWh output with 334 GW capacity, strong renewables and thermal mix, 7% CAGR in generation, and growing demand, investments, and FDI inflows.

 

Key Points

India's 2017 power output reached 1,160 BU, third globally, supported by 334 GW capacity, rising renewables, and 7% CAGR.

✅ 1,160 BU generated; third after China and the US

✅ Installed capacity 334 GW; 65% thermal, rising renewables

✅ Generation CAGR ~7%; demand, FDI, investments rising

 

India now generates around 1,160.1 billion units of electricity in financial year 2017, up 4.72% from the previous year, and amid surging global electricity demand that is straining power systems. The country is behind only China which produced 6,015 terrawatt hours (TWh. 1 TW = 1,000,000 megawatts) and the US (4,327 TWh), and is ahead of Russia, Japan, Germany, and Canada.


 

India’s electricity production grew 34% over seven years to 2017, and the country now produces more energy than Japan and Russia, which had 27% and 8.77% more electricity generation capacity installed, respectively, than India seven years ago.

India produced 1,160.10 billion units (BU) of electricity–one BU is enough to power 10 million households (one household using average of about 3 units per day) for a month–in financial year (FY) 2017. Electricity production stood at 1,003.525 BU between April 2017-January 2018, according to a February 2018 report by India Brand Equity Foundation (IBEF), a trust established by the commerce ministry.

#google#

With a production of 1,423 BU in FY 2016, India was the third largest producer and the third largest consumer of electricity in the world, behind China (6,015 BU) and the United States (4,327 BU).

With an annual growth rate of 22.6% capacity addition over a decade to FY 2017, renewables beat other power sources–thermal, hydro and nuclear. Renewables, however, made up only 18.79% of India’s energy, up 68.65% since 2007, and globally, low-emissions sources are expected to cover most demand growth in the coming years. About 65% of installed capacity continues to be thermal.

As of January 2018, India has installed power capacity of 334.4 gigawatt (GW), making it the fifth largest installed capacity in the world after European Union, China, United States and Japan, and with much of the fleet coal-based, imported coal volumes have risen at times amid domestic supply constraints.

The government is targeting capacity addition of around 100 GW–the current power production of United Kingdom–by 2022, as per the IBEF report.


 

Electricity generation grew at 7% annually

India achieved a 34.48% growth in electricity production by producing 1,160.10 BU in 2017 compared to 771.60 BU in 2010–meaning that in these seven years, electricity production in India grew at a compound annual growth rate (CAGR) of 7.03%, while thermal power plants' PLF has risen recently amid higher demand and lower hydro.

 

Generation capacity grew at 10% annually

Of 334.5 GW installed capacity as of January 2018–up 60% from 132.30 GW in 2007–thermal installed capacity was 219.81 GW. Hydro and renewable energy installed capacity totaled 44.96 GW and 62.85 GW, respectively, said the report.

The CAGR in installed capacity over a decade to 2017 was 10.57% for thermal power, 22.06% for renewable energy–the fastest among all sources of power–2.51% for hydro power and 5.68% for nuclear power.

 

Growing demand, higher investments will drive future growth

Growing population and increasing penetration of electricity connections, along with increasing per-capita usage would provide further impetus to the power sector, said the report.

Power consumption is estimated to increase from 1,160.1 BU in 2016 to 1,894.7 BU in 2022, as per the report, though electricity demand fell sharply in one recent period.

Increasing investment remained one of the driving factors of power sector growth in the country.

Power sector has a 100% foreign direct investment (FDI) permit, which boosted FDI inflows in the sector.

Total FDI inflows in the power sector reached $12.97 billion (Rs 83,713 crore) during April 2000 to December 2017, accounting for 3.52% of FDI inflows in India, the report said.

 

Related News

View more

TC Energy confirms Ontario pumped storage project is advancing

Ontario Pumped Storage advances as Ontario's largest energy storage project, delivering clean electricity, long-duration capacity, and grid reliability for peak demand, led by TC Energy and Saugeen Ojibway Nation, with IESO review underway.

 

Key Points

A long-duration storage project in Meaford storing clean power for peak demand, supporting Ontario's emission-free grid.

✅ Stores clean electricity to power 1M homes for 11 hours

✅ Partnership: TC Energy and Saugeen Ojibway Nation

✅ Pending IESO review and OEB regulation decisions

 

In a bid to accelerate the province's ambitions for clean economic growth, TC Energy Corporation has announced significant progress in the development of the Ontario Pumped Storage Project. The Government of Ontario in Canada has unveiled a plan to address growing energy needs as a sustainable road map aimed at achieving an emission-free electricity sector, and as part of this plan, the Ministry of Energy is set to undertake a final evaluation of the proposed Ontario Pumped Storage Project. A decision is expected to be reached by the end of the year.

Ontario Pumped Storage is a collaborative effort between TC Energy and the Saugeen Ojibway Nation. The project is designed to be Ontario's largest energy storage initiative, capable of storing clean electricity to power one million homes for 11 hours. As the province strives to transition to a cleaner electricity grid by embracing clean power across sectors, long duration storage solutions like Ontario Pumped Storage will play a pivotal role in providing reliable, emission-free power during peak demand periods.

The success of the Project hinges on the approval of TC Energy's board of directors and a fruitful partnership agreement with the Saugeen Ojibway Nation. TC Energy is aiming for a final investment decision in 2024, as Ontario confronts an electricity shortfall in the coming years, with the anticipated in-service date being in the early 2030s, pending regulatory and corporate approvals.

“Ontario Pumped Storage will be a critical component of Ontario’s growing clean economy and will deliver significant benefits and savings to consumers,” said Corey Hessen, Executive Vice-President and President, TC Energy, Power and Energy Solutions. “Ontario continues to attract major investments that will have large power needs — many of which are seeking zero-emission energy before they invest. We are pleased the government is advancing efforts to recognize the significant role that long duration storage plays — firming resources, including new gas plants under provincial consideration, will become increasingly valuable in supporting a future emission-free electricity system.” 

The Municipality of Meaford also expressed its support for the project, recognizing the positive impact it could have on the local economy and the overall electricity system of Ontario. Additionally, various stakeholders, including LiUNA OPDC, LiUNA Local 183, and the Ontario Chamber of Commerce, lauded the potential for job creation, training opportunities, and resilient energy infrastructure as Ontario seeks new wind and solar power to ease a coming electricity supply crunch.

The timeline for Ontario Pumped Storage's progress includes a final analysis by the Independent Electricity System Operator (IESO) to confirm its role in Ontario's electricity system and in balancing demand and emissions during the transition, to be completed by 30 September 2023. Concurrently, the Ministry of Energy will engage in consultations on the potential regulation of the Project via the Ontario Energy Board, while debates over clean, affordable electricity intensify ahead of the Ontario election, with a final determination scheduled for 30 November 2023.

 

Related News

View more

Adani Electricity's Power Supply Cuts in Mumbai

Adani Electricity Mumbai Power Cuts follow non-payment rules, reflecting billing disputes, regulatory compliance, consumer impact, and affordability concerns, while prompting mitigation measures like flexible payment plans, assistance programs, and clearer communication for residents.

 

Key Points

AEML cutoffs for unpaid bills per rules, raising affordability worries, billing issues, and calls for flexible aid.

✅ Triggered by unpaid bills under regulatory guidelines

✅ Affordability and billing transparency concerns raised

✅ Mitigation: flexible plans, aid for low-income users

 

Adani Electricity Mumbai Limited (AEML) recently made headlines by cutting power supply to around 100 homes in Mumbai, sparking discussions about the reasons behind this action and its implications for consumers, especially as reports like the Northeast D.C. outage continue to surface.

Background of the Incident

The power supply disconnections by AEML were reportedly due to non-payment of electricity bills by the affected households. This action, although necessary under AEML's policies and in accordance with regulatory guidelines, has raised concerns about the impact on residents, particularly during challenging economic times when pandemic electricity shut-offs highlighted energy insecurity.

Reasons for Non-Payment

Non-payment of electricity bills can stem from various reasons, including financial hardships, disputes over billing accuracy, or unforeseen circumstances affecting household finances. In Mumbai, where the cost of living is high, utility bills constitute a significant portion of monthly expenses for many households, mirroring trends of rising electricity bills seen elsewhere.

Regulatory and Legal Framework

AEML's decision to disconnect power supply aligns with regulatory provisions governing utility services, which may include emergency disconnection moratoriums in other jurisdictions. Utility companies are mandated to enforce bill payments to maintain operational sustainability and ensure fair distribution of resources among consumers.

Consumer Impact and Response

The power disconnections have prompted reactions from affected residents and consumer advocacy groups, highlighting issues related to affordability, transparency in billing practices, and the need for supportive measures during times of economic distress amid heat-related electricity struggles that pressure vulnerable households.

Mitigation Measures

In response to such incidents, utility companies and regulatory authorities often implement mitigation measures. These may include flexible payment options, financial assistance programs for low-income households, and enhanced communication about billing procedures and payment deadlines, along with policy scrutiny such as utility spending oversight to curb unnecessary costs.

Future Considerations

As cities like Mumbai continue to grow and face challenges related to urbanization and infrastructure development, ensuring reliable and affordable access to essential services like electricity, including efforts to prevent summer power outages, remains a priority. Balancing the operational needs of utility providers with consumer welfare concerns requires ongoing dialogue and proactive measures from all stakeholders.

Conclusion

The power supply cuts by Adani Electricity in Mumbai underscore the complexities of managing utility services in urban centers. While necessary for financial viability and regulatory compliance, such actions also highlight broader issues of affordability and consumer protection. Moving forward, collaborative efforts between utility companies, regulatory authorities, and community stakeholders are essential in addressing these challenges and ensuring equitable access to essential services for all residents.

 

Related News

View more

Sign Up for Electricity Forum’s Newsletter

Stay informed with our FREE Newsletter — get the latest news, breakthrough technologies, and expert insights, delivered straight to your inbox.

Electricity Today T&D Magazine Subscribe for FREE

Stay informed with the latest T&D policies and technologies.
  • Timely insights from industry experts
  • Practical solutions T&D engineers
  • Free access to every issue

Download the 2025 Electrical Training Catalog

Explore 50+ live, expert-led electrical training courses –

  • Interactive
  • Flexible
  • CEU-cerified