Nuclear plant safety checks system under fire

By Christian Science Monitor


Substation Relay Protection Training

Our customized live online or in‑person group training can be delivered to your staff at your location.

  • Live Online
  • 12 hours Instructor-led
  • Group Training Available
Regular Price:
$699
Coupon Price:
$599
Reserve Your Seat Today
The federal re-licensing system used to ensure that America's 1970s-era nuclear plants are safe for future decades is coming under fire following an audit that found key safety evaluations lacked critical documentation.

Without the documentation, regulators cannot be sure how carefully – or even if – the plants' key safety systems had been checked.

In filings last month, New York and Vermont regulators called for an overhaul of the Nuclear Regulatory Commission relicensing program before the NRC allows a plant in each of their states to operate for 20 more years.

Congress is eager to look at the relicensing question, too – as well as at other concerns such as the video showing guards asleep at a nuclear plant last year. Hearings are expected soon, says a staffer with the House Energy and Commerce Committee.

A half-dozen citizen groups have also filed objections, claiming the internal audit of the NRC's relicensing practices raises serious questions not only about current relicensing applications but past ones as well.

"Do we think the whole process is flawed? Yes, we do," says Richard Webster, an attorney for the Eastern Environmental Law Center in Newark, N.J. "The NRC can't document that these reviews were done properly and there are indications some weren't done well at all."

Relicensing is a crucial part of America's current energy strategy. The nation's 104 nuclear plants supply about one-fifth of the nation's electricity. If they are shut down, the US would have to replace them with new nuclear plants – or dozens of coal-fired plants, which would raise greenhouse-gas emissions.

So far, the NRC has relicensed nearly half of the nuclear plants, with another 35 under review. The agency expects some 20 more plants to apply for relicensing soon.

Concerns about the relicensing process stem from a report released last September by the NRC's internal watchdog, the Office of Inspector General. In the 13 relicensing cases it examined, the office found little evidence that NRC staff had confirmed the integrity of aging safety systems they approved. For example: 98 percent of 458 passages in audit, inspection, and safety evaluation reports failed to adequately document or support NRC conclusions.

Problems fell into two categories: "red" cases, where no specific support was found, and "yellow" cases, where support was often provided by the companies whose plants were being relicensed. In those latter cases, the report found that NRC safety evaluation language was often "identical or nearly identical" to the information that the companies had provided in the license renewal application.

"We asked NRC staff: 'Where is any evidence that you did anything?'" says Stephen Dingbaum, the NRC's assistant inspector general for audits. "With its cut-and-paste approach, the agency has left itself in a position in which it is difficult for them to show what they have and haven't done."

Even more serious, he says, in 35 percent of "red" cases there was "no mention of review methodology or no specific support" at all for NRC staff findings that the 13 plants had successfully met safety requirements.

"The safety analysis was probably done," Mr. Dingbaum says. "It's just that we don't have sufficient evidence to know whether it was, or was not, done."

In written responses to those charges, the NRC agreed there is a problem, but it argues it is mainly about providing adequate documentation.

"The staff will update report-writing guidance to include management expectations and report-writing standards," William Kane, the NRC's deputy executive director for reactor and preparedness programs, wrote in a memorandum to Mr. Dingbaum in October.

Such improvements don't necessarily call into question the quality of past relicensing, says Gregory Jaczko, one of the NRC's three commissioners. "It was a good report.... We need to see put in place an improved review process, and then we'll have better information about whether there's anything we need to go back and revisit with any of the previous (relicensing) reviews."

Nuclear industry spokesmen, too, say there's nothing seriously wrong.

"We saw the [inspector general's] report as confirming that the NRC's documentation in its reports was comprehensive," says Anthony Pietrangelo, vice president for regulatory affairs at the Nuclear Energy Institute in Washington. "But from a documentation standpoint ... they need to do a better job of explaining how they verified the adequacy of the licensing program."

State regulators remain wary.

There is the "more serious question of whether license renewals have been granted to plants that do not actually meet NRC safety requirements," New York regulators argued last month when they petitioned the NRC to halt relicensing of the Indian Point nuclear plant in Buchanan, N.Y., until the process is fixed.

The relicensing process is already under fire for another reason. Massachusetts and New York have filed lawsuits arguing that the relicensing process should also take into account the vulnerability of plants to terrorist attack.

In any case, aging nuclear plants present unexpected problems, antinuclear advocates say. They point to Vermont Yankee, a 35-year-old facility owned by Entergy Nuclear Operations. The NRC had already conducted a relicensing evaluation of its safety systems but had not announced a decision when, last August, one of the plant's cooling towers partially collapsed.

That spurred Vermont regulators to demand an overhaul of the NRC's relicensing process. State officials had already approved an independent review of the plant's safety systems.

"After the cooling tower collapsed, it really shook the confidence of Vermonters," says Stephen Wark, a spokesman for Vermont's Department of Public Service, which oversees utilities. "That's one reason why we're working with NRC but also pursuing a parallel path doing our own independent safety review."

Related News

BC’s Electric Highway

British Columbia Electric Highway connects urban hubs and remote communities with 1,400+ EV charging stations, fast chargers, renewable energy, and clean transportation infrastructure, easing range anxiety and supporting climate goals across the province.

 

Key Points

A province-wide EV charging network for low-carbon travel with fast chargers in urban, rural and remote areas.

✅ 1,400+ stations across urban, rural, and remote B.C.

✅ Fast-charging, renewable-powered sites cut range anxiety

✅ Supports climate goals and boosts local economies

 

British Columbia has taken a significant step toward sustainable transportation with the completion of its Electric Highway, a comprehensive network of electric vehicle (EV) charging stations strategically placed across the province. This ambitious project not only supports the growing number of EV owners as the province expands EV charging across communities but also plays a crucial role in the province’s efforts to combat climate change and promote clean energy.

The Electric Highway spans from the southern reaches of the province to its northern edges, connecting key urban centers and remote communities alike. With over 1,400 charging stations installed at various locations, the network is designed to accommodate the diverse needs of EV drivers, ensuring they can travel confidently without the fear of running out of charge, with B.C. Hydro expansion in southern B.C. further bolstering coverage.

One of the standout features of the Electric Highway is its accessibility. Charging stations are located not only in urban areas but also in rural and remote regions, allowing residents in those communities to embrace electric vehicles, supported by EV charger rebates available provincewide.

The completion of the Electric Highway comes at a time when EV adoption is on the rise. As more consumers recognize the benefits of electric vehicles—including lower operating costs, reduced greenhouse gas emissions, and decreased dependence on fossil fuels—alongside rebates for home and workplace charging that reduce barriers—demand for charging infrastructure has surged. The Electric Highway provides the essential support needed to facilitate this shift, enabling residents and visitors to travel long distances with ease.

Moreover, the Electric Highway aligns with British Columbia’s climate goals. The province has set ambitious targets to reduce greenhouse gas emissions and transition to a low-carbon economy. By promoting electric vehicles and investing in charging infrastructure, British Columbia aims to lower emissions from the transportation sector, which is one of the largest contributors to climate change, with related efforts including electric ferries that complement road decarbonization. The completion of this highway is a significant milestone in the province’s journey toward a greener future.

The project has also garnered attention for its innovative approach to energy sourcing. Many of the charging stations are powered by renewable energy, further reducing their carbon footprint. This commitment to sustainability not only enhances the environmental benefits of electric vehicles but also reinforces British Columbia’s reputation as a leader in clean energy initiatives, including the $900 million hydrogen project advancing alternative fuels.

In addition to its environmental advantages, the Electric Highway has the potential to boost the local economy. As EV travel becomes more commonplace, businesses along the route can capitalize on increased foot traffic from travelers seeking charging options. This economic uplift is especially important for small towns and rural areas, where tourism and local commerce can thrive with the right infrastructure in place.

Furthermore, the completion of the Electric Highway is expected to catalyze further innovation in the EV sector. As charging technology continues to evolve, the province is poised to be at the forefront of advancements that enhance the EV driving experience. Initiatives such as ultra-fast charging and smart charging solutions could soon become the norm, making electric travel even more convenient.

The provincial government is also focusing on public awareness campaigns to educate residents about the benefits of electric vehicles and how to use the new charging infrastructure. By fostering a greater understanding of EV technology and its advantages, the government hopes to inspire more people to make the switch from gasoline-powered vehicles to electric ones.

In conclusion, the completion of the Electric Highway marks a transformative moment for British Columbia and its commitment to sustainable transportation. By providing a reliable network of charging stations, the province is making electric vehicle travel a reality for everyone, promoting environmental responsibility while supporting local economies. As more British Columbians embrace electric mobility, the Electric Highway stands as a testament to the province’s dedication to creating a cleaner, greener future for generations to come. With this essential infrastructure in place, British Columbia is paving the way for a new era of transportation that prioritizes sustainability and accessibility.

 

Related News

View more

Four Facts about Covid and U.S. Electricity Consumption

COVID-19 Impact on U.S. Electricity Consumption shows commercial and industrial demand dropped as residential use rose, with flattened peak loads, weekday-weekend convergence, Texas hourly data, and energy demand as a real-time economic indicator.

 

Key Points

It reduced commercial and industrial demand while raising residential use, shifting peaks and weekday patterns.

✅ Commercial electricity down 12%; industrial down 14% in Q2 2020

✅ Residential use up 10% amid work-from-home and lockdowns

✅ Peaks flattened; weekday-weekend loads converged in Texas

 

This is an important turning point for the United States. We have a long road ahead. But one of the reasons I’m optimistic about Biden-Harris is that we will once again have an administration that believes in science.

To embrace this return to science, I want to write today about a fascinating new working paper by Tufts economist Steve Cicala.

Professor Cicala has been studying the effect of Covid on electricity consumption since back in March, when the Wall Street Journal picked up his work documenting an 18% decrease in electricity consumption in Italy.

The new work, focused on the United States, is particularly compelling because it uses data that allows him to distinguish between residential, commercial, and industrial sectors, against a backdrop of declining U.S. electricity sales over recent years.

Without further ado, here are four facts he uncovers about Covid and U.S. electricity demand during COVID-19 and consumption.

 

Fact #1: Firms Are Using Less
U.S. commercial electricity consumption fell 12% during the second quarter of 2020. U.S. industrial electricity consumption fell 14% over the same period.

This makes sense. The second quarter was by some measures, the worst quarter for the U.S. economy in over 145 years!

Economic activity shrank. Schools closed. Offices closed. Factories closed. Restaurants closed. Malls closed. Even health care offices closed as patients delayed going to the dentist and other routine care. All this means less heating and cooling, less lighting, less refrigeration, less power for computers and other office equipment, less everything.

The decrease in the industrial sector is a little more surprising. My impression had been that the industrial sector had not fallen as far as commercial, but amid broader disruptions in coal and nuclear power that strained parts of the energy economy, the patterns for both sectors are quite similar with the decline peaking in May and then partially rebounding by July. The paper also shows that areas with higher unemployment rates experienced larger declines in both sectors.

 

Fact #2: Households Are Using More
While firms are using less, households are using more. U.S. residential electricity consumption increased 10% during the second quarter of 2020. Consumption surged during March, April, and May, a reflection of the lockdown lifestyle many adopted, and then leveled off in June and July – with much less of the rebound observed on the commercial/industrial side.

This pattern makes sense, too. In Professor Cicala’s words, “people are spending an inordinate amount of time at home”. Many of us switched over to working from home almost immediately, and haven’t looked back. This means more air conditioning, more running the dishwasher, more CNN (especially last week), more Zoom, and so on.

The paper also examines the correlates of the decline. Areas in the U.S. where more people can work from home experienced larger increases. Unemployment rates, however, are almost completely uncorrelated with the increase.

 

Fact #3: Firms are Less Peaky
The paper next turns to a novel dataset from Texas, where Texas grid reliability is under active discussion, that makes it possible to measure hourly electricity consumption by sector.

As the figure above illustrates, the biggest declines in commercial/industrial electricity consumption have occurred Monday through Friday between 9AM and 5PM.

The dashed line shows the pattern during 2019. Notice the large spikes in electricity consumption during business hours. The solid line shows the pattern during 2020. Much smaller spikes during business hours.

 

Fact #4: Everyday is Like Sunday
Finally, we have what I would like to nominate as the “Energy Figure of the Year”.

Again, start with the pattern for 2019, reflected by the dashed line. Prior to Covid, Texas households used a lot more electricity on Saturdays and Sundays.

Then along comes Covid, and turned every day into the weekend. Residential electricity consumption in Texas during business hours Monday-Friday is up 16%(!).

In the pattern for 2020, it isn’t easy to distinguish weekends from weekdays. If you feel like weekdays and weekends are becoming a big blur – you are not alone.

 

Conclusion
Researchers are increasingly thinking about electricity consumption as a real-time indicator of economic activity, even as flat electricity demand complicates utility planning and investment. This is an intriguing idea, but Professor Cicala’s new paper shows that it is important to look sector-by-sector.

While commercial and industrial consumption indeed seem to measure the strength of an economy, residential consumption has been sharply countercylical – increasing exactly when people are not at work and not at school.

These large changes in behavior are specific to the pandemic. Still, with the increased blurring of home and non-home activities we may look back on 2020 as a key turning point in how we think about these three sectors of the economy.

More broadly, Professor Cicala’s paper highlights the value of social science research. We need facts, data, and yes, science, if we are to understand the economy and craft effective policies on energy insecurity and shut-offs as well.

 

Related News

View more

Barakah Unit 1 reaches 100% power as it steps closer to commercial operations, due to begin early 2021

Barakah Unit 1 100 Percent Power signals the APR-1400 reactor delivering 1400MW of clean baseload electricity to the UAE grid, advancing decarbonisation, reliability, and Power Ascension Testing milestones ahead of commercial operations in early 2021.

 

Key Points

The milestone where Unit 1 reaches full 1400MW output to the UAE grid, providing clean, reliable baseload electricity.

✅ Delivers 1400MW from a single generator to the UAE grid

✅ Enables clean, reliable baseload power with zero operational emissions

✅ Completes key Power Ascension Testing before commercial operations

 

The Emirates Nuclear Energy Corporation, ENEC, has announced that its operating and maintenance subsidiary, Nawah Energy Company, Nawah, has successfully achieved 100% of the rated reactor power capacity for Unit 1 of the Barakah Nuclear Energy Plant. This major milestone, seen as a crucial step in Abu Dhabi towards completion, brings the Barakah plant one step closer to commencing commercial operations, scheduled in early 2021.

100% power means that Unit 1 is generating 1400MW of electricity from a single generator connected to the UAE grid for distribution. This milestone makes the Unit 1 generator the largest single source of electricity in the UAE.

The Barakah Nuclear Energy Plant is the largest source of clean baseload electricity in the country, capable of providing constant and reliable power in a sustainable manner around the clock. This significant achievement accelerates the decarbonisation of the UAE power sector, while also supporting the diversification of the Nation’s energy portfolio as it transitions to cleaner electricity sources, similar to the steady development in China of nuclear energy programs now underway.

The accomplishment follows shortly after the UAE’s celebration of its 49th National Day, providing a strong example of the country’s progress as it continues to advance towards a sustainable, clean, secure and prosperous future, having made the UAE the first Arab nation to open a nuclear plant as it charts this path. As the Nation looks towards the next 50 years of achievements, the Barakah plant will generate up to 25 percent of the country’s electricity, while also acting as a catalyst of the clean carbon future of the Nation.

Mohamed Ibrahim Al Hammadi, Chief Executive Officer of ENEC said: "We are proud to deliver on our commitment to power the growth of the UAE with safe, clean and abundant electricity. Unit 1 marks a new era for the power sector and the future of the clean carbon economy of the Nation, with the largest source of electricity now being generated without any emissions. I am proud of our talented UAE Nationals, working alongside international experts who are working to deliver this clean electricity to the Nation, in line with the highest standards of safety, security and quality." Nawah is responsible for operating Unit 1 and has been responsible for safely and steadily raising the power levels since it commenced the start-up process in July, and connection to the grid in August.

Achieving 100% power is one of the final steps of the Power Ascension Testing (PAT) phase of the start-up process for Unit 1. Nawah’s highly skilled and certified nuclear operators will carry out a series of tests before the reactor is safely shut down in preparation for the Check Outage. During this period, the Unit 1 systems will be carefully examined, and any planned or corrective maintenance will be performed to maintain its safety, reliability and efficiency prior to the commencement of commercial operations.

Ali Al Hammadi, Chief Executive Officer of Nawah, said: "This is a key achievement for the UAE, as we safely work through the start-up process for Unit 1 of the Barakah plant. Successfully reaching 100% of the rated power capacity in a safe and controlled manner, undertaken by our highly trained and certified nuclear operators, demonstrates our commitment to safe, secure and sustainable operations as we now advance towards our final maintenance activities and prepare for commercial operations in 2021." The Power Ascension Testing of Unit 1 is overseen by the independent national regulator – the Federal Authority for Nuclear Regulation (FANR), which has conducted 287 inspections since the start of Barakah’s development. These independent reviews have been conducted alongside more than 40 assessments and peer reviews by the International Atomic Energy Agency, IAEA, and World Association of Nuclear Operators, WANO, reflecting milestones at nuclear projects worldwide that benchmark safety and performance.

This is an important milestone for the commercial performance of the Barakah plant. Barakah One Company, ENEC’s subsidiary in charge of the financial and commercial activities of the Barakah project signed a Power Purchase Agreement, PPA, with the Emirates Water and Electricity Company, EWEC, in 2016 to purchase all of the electricity generated at the plant for the next 60 years. Electricity produced at Barakah feeds into the national grid in the same manner as other power plants, flowing to homes and business across the country.

This milestone has been safely achieved despite the challenges of COVID-19. Since the beginning of the global pandemic, ENEC, and subsidiaries Nawah and Barakah One Company, along with companies that form Team Korea, including Korea Hydro & Nuclear Power, with KHNP’s work in Bulgaria illustrating its global role, have worked closely together, in line with all national and local health authority guidelines, to ensure the highest standards for health and safety are maintained for those working on the project. ENEC and Nawah’s robust business continuity plans were activated, alongside comprehensive COVID-19 prevention and management measures, including access control, rigorous testing, and waste water sampling, to support health and wellbeing.

The Barakah Nuclear Energy Plant, located in the Al Dhafra region of the Emirate of Abu Dhabi, is one of the largest nuclear energy new build projects in the world, with four APR-1400 units. Construction of the plant began in 2012 and has progressed steadily ever since. Construction of Units 3 and 4 are in the final stages with 93 percent and 87 percent complete respectively, benefitting from the experience and lessons learned during the construction of Units 1 and 2, while the construction of the Barakah Plant as a whole is now more than 95 percent complete.

Once the four reactors are online, Barakah Plant will deliver clean, efficient and reliable electricity to the UAE grid for decades to come, providing around 25 percent of the country’s electricity and, as other nations like Bangladesh expand with IAEA assistance, reinforcing global decarbonisation efforts, preventing the release of up to 21 million tons of carbon emissions annually – the equivalent of removing 3.2 million cars off the roads each year.

 

Related News

View more

Gaza’s sole electricity plant shuts down after running out of fuel

Gaza Power Plant Shutdown underscores the Gaza Strip's fuel ban, Israeli blockade, and electricity crisis, cutting megawatts, disrupting hospitals and quarantine centers, and exposing fragile energy supply, GEDCO warnings, and public health risks.

 

Key Points

An abrupt halt of Gaza's sole power plant due to a fuel ban, deepening the electricity crisis and straining hospitals.

✅ Israeli fuel ban halts Gaza's only power plant

✅ Available supply drops far below 500 MW demand

✅ Hospitals and COVID-19 quarantine centers at risk

 

The only electricity plant in the Gaza Strip shut down yesterday after running out of fuel banned from entering the besieged enclave by the Israeli occupation, Gaza Electricity Distribution Company announced.

“The power plant has shut down completely,” the company said in a brief statement, as disruptions like China power cuts reveal broader grid vulnerabilities.

Israel banned fuel imports into Gaza as part of punitive measures over the launching incendiary balloons from the Strip.

On Sunday, GEDCO warned that the industrial fuel for the electricity plant would run out, mirroring Lebanon's fuel shortage challenges, on Tuesday morning.

Since 2007, the Gaza Strip suffered under a crippling Israeli blockade that has deprived its roughly two million inhabitants of many vital commodities, including food, fuel and medicine, and regional strains such as Iraq's summer electricity needs highlight broader power insecurity.

As a result, the coastal enclave has been reeling from an electricity crisis, similar to when the National Grid warned of short supply in other contexts.

The Gaza Strip needs some 500 megawatts of electricity – of which only 180 megawatts are currently available – to meet the needs of its population, while Iran supplies about 40% of Iraq's electricity in the region.

Spokesman of the Ministry of Health in Gaza, Ashraf Al Qidra, said the lack of electricity undermines offering health services across Gaza’s hospitals.

He also warned that the lack of electricity would affect the quarantine centres used for coronavirus patients, reinforcing the need to keep electricity options open during the pandemic.

Gaza currently has three sources of electricity: Israel, which provides 120 megawatts and is advancing coal use reduction measures; Egypt, which supplies 32 megawatts; and the Strip’s sole power plant, which generates between 40 and 60 megawatts.

 

Related News

View more

New York State to investigate sites for offshore wind projects

NYSERDA Offshore Wind Data initiative funds geophysical and geotechnical surveys, seabed and soil studies on New York's shelf to accelerate siting, optimize foundation design, reduce costs, and advance clean energy deployment.

 

Key Points

State funding to support surveys and soil studies guiding offshore wind siting, design, and cost reduction.

✅ Up to $5.5M for geophysical and geotechnical data collection

✅ Focus on seabed soils, shelf geology, and foundation design inputs

✅ Accelerates siting, reduces risk, and lowers offshore wind costs

 

The New York State Energy Research and Development Authority (NYSERDA) is investing up to $5.5 million for the collection of geophysical and geotechnical data to determine future offshore wind development sites.

The funding is to look at seabed soil and geological data for the preliminary design and installation requirements for future offshore wind projects. Its part of N.Y. Gov. Andrew Cuomos plan to develop 9,000 megawatts of offshore wind energy by 2035.

Todays announcement is another step in Governor Cuomos steadfast march to achieving 9,000 megawatts of offshore wind by 2035, putting New York in a clear national leadership position when it comes to advancing this new industry through large-scale energy projects across the state. The surveys NYSERDA will be funding under this solicitation will expand the offshore wind industrys access to geophysical and geotechnical data that will provide the foundation for future offshore wind development in these areas, and accelerate project development while driving down costs, NYSERDA President and CEO Alicia Barton said.

NYSERDA will select one or more contractors to do the investigations, while recent DOE wind energy awards support complementary research, and develop a model for describing geophysical and geotechnical conditions. NYSERDA will also select a contractor to support project management and host the data that is collected. The submission deadline is Jan. 21, 2020.

Todays announcement builds on the data collected in a Geotechnical and Geophysical Desktop Study also released today, which includes information on the middle continental shelf off the shore of New York and New Jersey, where BOEM lease requests are shaping activity, creating a regional overview of the seafloor and sub-seafloor environment as it relates to offshore wind development.

Strong knowledge of environmental conditions and factors, including seabed soil conditions, are essential for the installation of offshore projects, such as Long Island proposals, but only a limited amount of soil sampling and testing has been undertaken to date.

The collection of geophysical and geotechnical data from areas off of New Yorks Atlantic coast is yet another demonstration of New Yorks leadership promoting the responsible development of offshore wind. The data generated by this initiative will ultimately lead to better projects, lower cost, and enhanced safety. New York is leading the way to a clean energy future, as the state finalizes renewable project contracts that expand capacity, and relying on data collection and sound science to get us there, New York Offshore Wind Alliance Director Joe Martens said.

 

Related News

View more

Rolls-Royce expecting UK approval for mini nuclear reactor by mid-2024

Rolls-Royce SMR UK Approval underscores nuclear innovation as regulators review a 470 MW factory-built modular reactor, aiming for grid power by 2029 to boost energy security, cut fossil fuels, and accelerate decarbonization.

 

Key Points

UK regulatory clearance for Rolls-Royce's 470 MW modular reactor, targeting grid power by 2029 to support clean energy.

✅ UK design approval expected by mid 2024

✅ First 470 MW unit aims for grid power by 2029

✅ Modular, factory-built; est. £1.8b per 10-acre site

 

A Rolls-Royce (RR.L) design for a small modular nuclear reactor (SMR) will likely receive UK regulatory approval by mid-2024, reflecting progress seen in the US NRC safety evaluation for NuScale as a regulatory benchmark, and be able to produce grid power by 2029, Paul Stein, chairman of Rolls-Royce Small Modular Reactors.

The British government asked its nuclear regulator to start the approval process in March, in line with the UK's green industrial revolution agenda, having backed Rolls-Royce’s $546 million funding round in November to develop the country’s first SMR reactor.

Policymakers hope SMRs will help cut dependence on fossil fuels and lower carbon emissions, as projects like Ontario's first SMR move ahead in Canada, showing momentum.

Speaking to Reuters in an interview conducted virtually, Stein said the regulatory “process has been kicked off, amid broader moves such as a Canadian SMR initiative to coordinate development, and will likely be complete in the middle of 2024.

“We are trying to work with the UK Government, and others to get going now placing orders, echoing expansions like Darlington SMR plans in Ontario, so we can get power on grid by 2029.”

In the meantime, Rolls-Royce will start manufacturing parts of the design that are most unlikely to change, while advancing partnerships like a MoU with Exelon to support deployment, Stein added.

Each 470 megawatt (MW) SMR unit costs 1.8 billion pounds ($2.34 billion) and would be built on a 10-acre site, the size of around 10 football fields, though projects in New Brunswick SMR debate have prompted questions about costs and timelines.

Unlike traditional reactors, SMRs are cheaper and quicker to build and can also be deployed on ships and aircraft. Their “modular” format means they can be shipped by container from the factory and installed relatively quickly on any proposed site.

 

Related News

View more

Sign Up for Electricity Forum’s Newsletter

Stay informed with our FREE Newsletter — get the latest news, breakthrough technologies, and expert insights, delivered straight to your inbox.

Electricity Today T&D Magazine Subscribe for FREE

Stay informed with the latest T&D policies and technologies.
  • Timely insights from industry experts
  • Practical solutions T&D engineers
  • Free access to every issue

Live Online & In-person Group Training

Advantages To Instructor-Led Training – Instructor-Led Course, Customized Training, Multiple Locations, Economical, CEU Credits, Course Discounts.

Request For Quotation

Whether you would prefer Live Online or In-Person instruction, our electrical training courses can be tailored to meet your company's specific requirements and delivered to your employees in one location or at various locations.