CSA Z462 Arc Flash Training – Electrical Safety Compliance Course

Our customized live online or in‑person group training can be delivered to your staff at your location.

  • Live Online
  • 6 hours Instructor-led
  • Group Training Available
Regular Price:
$249
Coupon Price:
$199
Reserve Your Seat Today
Coal is the elephant in our dining room — impossible to ignore. Because we depend on coal for 45 percent of our electricity, we will never be able to replace it entirely. So how can we make coal a "good neighbor" to the environment?

Carbon capture and sequestration (CCS) is a technique that removes CO2 in flue gas from power plant smokestacks and buries it in deep geologic formations. CCS is ready for use now, despite the protestations of grant-hungry researchers. The Shady Point power plant in eastern Oklahoma has been removing CO2 from flue gases and pumping it into depleting oil wells for years. CO2 emissions from a cement plant in Montana are pipelined to oilfields in Canada for sequestration. A busy market buying and selling CO2 operates today in the petroleum industry.

Thirty years of experience in finding, transporting and injecting CO2 into geologic formations to move more oil out of a reservoir to the surface demonstrates that CCS is a viable, secure way to dispose of CO2.

Until recently, the only source of CO2 for oil recovery lay in naturally occurring geologic traps in New Mexico and Colorado, secure in rocks more than 60 million years old. That ancient leak-proof sequestration history should satisfy even the most skeptical critic.

Trapping mechanisms — porous rocks capped by sealing rocks like salt or shale — are common round the world. Norway says its saltwater aquifer used in sequestration in the North Sea can provide enough disposal space for all the CO2 Europe will produce in the next 100 years. Injection of CO2 works in west Texas; in Oklahoma; in Alberta, Canada; and off Norway in the North Sea. How can we doubt that CCS represents a solution for disposing of CO2 from coal-fired power plants today? Now comes the sticking point: cost. The equipment for removing CO2 from flue gases is specialized and therefore expensive. However, when a huge market develops at coal-fired plants, the price for mass-producing the equipment will come down. The result: a bonanza of new manufacturing jobs in the United States.

Geologic studies near the plants will be required to locate one or more sealed saltwater aquifers in which to inject the CO2. In many states, enough wells drilled for oil and gas can provide reliable information about subsurface conditions.

Some concern has been raised about injecting CO2 near populated areas. In west Texas, the cities of Midland and Odessa, with some 250,000 residents, are surrounded by many CO2 injection wells with no escaping CO2 detected for 30 years. A new technology, coal conversion to synthetic gas, or syngas, which is composed of hydrogen, CO2 and carbon monoxide, provides a further boon. This almost inexhaustible supply of hydrogen can power fuel cells, while the carbon gases can be sequestered.

Consumers deserve to have an estimate of the costs such activities might entail. Initial units may increase electricity costs as much as 50 percent, though eventually installations will add only about 30 percent. Other than mandating huge conservation efforts or imposing carbon taxes, we have few alternatives to carbon capture and sequestration.

Related News

PG&E pleads guilty to 85 counts in 2018 Camp Fire

PG&E Camp Fire Guilty Plea underscores involuntary manslaughter charges as the utility admits sparking Paradise's…
View more

It's CHEAP but not necessarily easy: Crosbie introduces PCs' Newfoundland electricity rate reduction strategy

Crosbie Hydro Energy Action Plan outlines rate mitigation for Muskrat Falls, leveraging Nalcor oil revenues,…
View more

Joni Ernst calls Trump's wind turbine cancer claim 'ridiculous'

Wind Turbine Cancer Claim debunked: Iowa Republican senators back wind energy as fact-checks and DOE…
View more

Fixing California's electric grid is like repairing a car while driving

CAISO Clean Energy Transition outlines California's path to 100% carbon-free power by 2045, scaling renewables,…
View more

New York Finalizes Contracts for 23 Renewable Projects Totaling 2.3 GW

New York Renewable Energy Contracts secure 23 projects totaling 2.3 GW, spanning offshore wind, solar,…
View more

New England Is Burning the Most Oil for Electricity Since 2018

New England oil-fired generation surges as ISO New England manages a cold snap, dual-fuel switching,…
View more

Sign Up for Electricity Forum’s Newsletter

Stay informed with our FREE Newsletter — get the latest news, breakthrough technologies, and expert insights, delivered straight to your inbox.

Electricity Today T&D Magazine Subscribe for FREE

Stay informed with the latest T&D policies and technologies.
  • Timely insights from industry experts
  • Practical solutions T&D engineers
  • Free access to every issue

Live Online & In-person Group Training

Advantages To Instructor-Led Training – Instructor-Led Course, Customized Training, Multiple Locations, Economical, CEU Credits, Course Discounts.

Request For Quotation

Whether you would prefer Live Online or In-Person instruction, our electrical training courses can be tailored to meet your company's specific requirements and delivered to your employees in one location or at various locations.